What Housing Associations Should Check Before Appointing a Damp and Mould Contractor

13 Oct 2026 / , ,

Damp and mould contractors for housing associations are expected to hold accreditations, have years of experience, and work to proper standards for quality results.

A provider’s response to damp and mould is only as good as the contractor it sends. While a damp and mould contractor for housing associations should meet certain criteria, a landlord holds full responsibility. Under Awaab’s Law, slow attendance, a vague report or a repeat mould wash all fall back on the landlord. They are expected to remediate these issues within a certain timescale of when damp or mould is first reported.

Before hiring a damp and mould contractor for a housing association, you should check:

  1. If they are qualified individuals who can diagnose the cause.
  2. If they hold recognised accreditations with bodies like the PCA, CHAS, NHMF, and QANW.
  3. If they have capacity to meet Awaab’s Law timescales with a paper trail.
  4. If they offer long-term guarantees they can honour.
  5. If they have health and safety, insurance, and RAMS.
  6. If they have a track record with housing providers.

Can a Contractor Diagnose the Cause of Damp and Treat the Mould?

Mould is usually a symptom of a bigger issue like condensation, rising damp, or penetrating damp, which all require different treatments. Trying to fix it with the wrong method could allow the mould to return. The Housing Ombudsman has been critical of repeated mould washes that never fix the underlying problem.

A surveyor should hold PCA qualifications such as Certificated Surveyor in Remedial Treatment (CSRT) and Certificated Surveyor in Structural Waterproofing (CSSW). CSRT emphasises investigation, building pathology, and identifying the root causes of moisture or timber problems. CSSW is for specialised waterproofing design, where moisture problems are diagnosed, site conditions are evaluated, and solutions are implemented.

After a survey, you will receive a report of what was found and what should be done next. A good report will usually contain the cause, moisture readings, dated photos, severity, recommended works, and timescales. These should be clear enough to go straight into the provider’s case records.

Which Accreditations Should a Damp and Mould Contractor Hold?

No single badge can prove a contractor is right for social housing. However, the right combination covers trade standards, safety and financial protection, and experience.

Property Care Association

The Property Care Association (PCA) is a trade body for damp, timber, and structural waterproofing specialists. Members are vetted and work to the PCA codes of practice. Kenwood is a PCA-registered business, and has been a member since 2003.

Contractor’s Health and Safety Assessment Scheme

The Contractor’s Health and Safety Assessment Scheme (CHAS) is an independent check of health and safety management, often a baseline in social housing procurement. Kenwood is an approved contractor holding a CHAS accreditation and is officially registered on the SSIP portal.

National Housing Maintenance Forum

The National Housing Maintenance Forum (NHMF) shows engagement with the social housing maintenance sector and familiarity with the M3NHF Schedule of Rates that many providers rely on. Kenwood has been a member of the NHMF since 2025, represented by the CEO, Jake Clarke.

Quality Assured National Warranties

Quality Assured National Warranties (QANW) is a provider of insurance-backed guarantees that allow them to survive and continue, even if the contractor ceases trading. Kenwood operates under QANW’s contractor’s policy scheme, covering their services that include damp proofing and timber treatment.

For a complete list of Kenwood’s accreditations, you can refer to the up-to-date list.

Can They Work to Your Awaab’s Law Timescales?

According to the government-published guidance, Awaab’s Law sets fixed timescales for social landlords to investigate and resolve damp and mould hazards. These deadlines only work if the contractor can attend, diagnose, and report within them.

Before hiring a damp and mould contractor, you need to ask how they triage urgency (emergency versus routine), how quickly they can attend and report, and how they record their steps. Providers tend to set different urgencies, like 24-hour emergencies, and contractors should work to the Service-Level Agreement (SLA) on each job.

Contractors should also document their work, with dated reports, photos, communication logs, and completion records. These form an evidence trail that might be needed if the provider has a case that’s escalated to the Housing Ombudsman.

While an Awaab’s Law contractor should work to the SLA, the landlord holds full legal responsibility throughout the process. They are obligated to follow the guidelines set by Awaab’s Law and make their properties safe for tenants.

Will Their Guarantees Outlast the Contract?

As standard, damp treatment guarantees often run for 20 years or more, which is longer than many contracts and sometimes longer than contractors stay in business. These are made to protect tenants and homeowners in the event of treatments failing, and the contractor no longer operating.

You should ask your contractor how long their business has been trading for, and if their guarantees are insurance-backed.

Kenwood has over 40 years in damp and timber treatments, offering guarantees that are backed through QANW.

What Health and Safety, Insurance, and RAMS Should You Ask For?

Every business should be backed by some form of health and safety and liability coverage. When asking your contractor about these factors, you should request:

  • Current public and employer’s liability insurance certificates.
  • Job-specific risk assessments and method statements.
  • COSHH assessments for treatment products and mould biocide.
  • Evidence of operative training.

Occupied homes need extra care, especially since they may house vulnerable tenants like children, older people, or those with chronic illnesses like asthma. A business that is CHAS-approved, for example, will likely have health and safety management approval.

Have They Worked With Housing Providers Before?

Previous documented experience with other housing providers can give a good example of what to expect. You should ask social housing damp contractors for references or case studies from other housing providers, experience working with tenants in occupied homes, or familiarity with provider reporting systems and portals.

How Does Kenwood Work With Housing Providers?

Kenwood has qualified surveyors that work to a cause-first diagnosis, providing written reports built for case records, work triaged to the provider’s SLAs, and has coverage across London, the South East, and the Home Counties.

Kenwood is PCA-registered, with over 40 years of experience in timber and damp treatment, attending around 20,000 properties every year. They also offer next-day services, and can attend properties in the event of an emergency.

If you want to learn more about how Kenwood supports social housing providers, you can explore the dedicated guide which details how they help and the standards their team work to. Get in touch with the team if you have any questions about Kenwood’s accreditations and experience.

Frequently Asked Questions

What should a damp and mould contractor for housing associations provide?

They should provide a qualified survey, discover the cause, create a written report with evidence, offer treatment, and provide a guarantee.

What does a PCA approved contractor mean?

A PCA-approved contractor is a widely used benchmark for trustworthy contractors in the industry. While it’s not a legal requirement to have a PCA registration, it’s good to prove experience and build trust.

What is the difference between CSRT and CSSW?

A CSRT is for investigating the cause of damp and timber problems and how to remediate them. CSSW is for waterproofing qualifications, where moisture issues are identified and fixed. Both of these are PCA qualifications.

How quickly should a contractor respond to damp and mould under Awaab’s Law?

Timescales for response regarding damp and mould will usually depend on the severity itself. There are different scales for emergency hazards compared to significant hazards. Consult our guide for the full timescales set by Awaab’s Law.

Should a social housing damp contractor offer an insurance-backed guarantee?

Yes, a social housing damp contractor should offer one so the guarantee holds in the event they cease trading.

Download document