Rising damp treated in a lower-ground-floor flat in north-west London

Flats below street level take damp from two directions: up from the ground and sideways through walls with soil behind them. The owner of this lower-ground-floor flat asked us to find out why the walls were damp and the skirting boards were rotting.

At a glance

  • Location: North-west London
  • Property: 1900s mid-terrace house converted into flats, lower ground floor, 13.5-inch solid brick
  • Problems found: Rising damp and lateral damp from high ground outside, decayed skirting boards
  • Treatments: Chemical damp-proof course, cementitious tanking, waterproof replastering
  • Time on site: About 2½ weeks
  • Guarantee: 20 years (rising damp), 10 years (tanking)

What we found

Our surveyor found rising damp in the walls, made worse by high ground levels outside. The 13.5-inch solid brick walls had no effective damp-proof course, and moisture was also pushing in sideways from the soil.

The skirting boards had started to decay where they touched the damp walls.

Damp-damaged plaster in the shower area.

He also found damp in the shower room and bathroom caused by a roof covering defect and a suspected plumbing leak, and noted that the concrete entrance steps needed asphalting to stop water getting in. These aren’t our trade, so we recommended roofing, plumbing and asphalting contractors rather than quoting for them.

What we did

Our own team was on site for about two and a half weeks, from mid-August to early September.

1. Stripping out. We sheeted off the work area, then removed the radiators, skirting boards and damp, salt-contaminated plaster, taking the walls back to brick.

Sheeting hung to keep dust contained while we stripped out.

Walls stripped back to the original brickwork.

2. A new damp-proof course. We pressure-injected Kenwood siliconate fluid into the base of the walls, with vertical damp-proof courses where treated walls meet untreated ones.

3. Tanking. We coated the walls with Kenwood SWS cementitious tanking to hold back the damp coming in from the ground outside. In the shower room it runs the full height of the walls.

The shower room tanked and rendered to full height.

4. Replastering. We rendered the walls with our salt-inhibiting waterproof render, then skimmed them ready for decorating.

Waterproof render going on under the window.

The result

The flat now has dry, freshly plastered walls throughout the treated rooms, ready for new skirting boards and decorating. The work is covered by our 20-year written guarantee for the rising damp and a 10-year guarantee for the tanking.

The window wall: stripped back, and replastered.

The shower room, replastered and ready to be refitted.

Spot the signs: damp in a basement or lower-ground flat

Look for a tide mark of staining on the lower walls, white salt deposits, crumbling plaster and skirting boards that feel soft. A musty smell that never quite goes away is another possible sign. Walls with ground behind them can be damp all the way up, not just at the bottom.

Book a survey · Read more about damp proofing and basement tanking · More damp proofing projects